Cold Isostatic Presses (CIP), Wet Bag, and Molds

EPSI, a world leader in custom-engineered high-pressure solutions, introduces its Cold Isostatic Press Production Unit (CIP). Designed for high productivity and low maintenance, EPSI’s Cold Isostatic Presses (CIP) are ideal for the ceramic, carbon, plastics, and powder metals industries and can be customized to suit application-specific needs. Cold Isostatic Presses (CIP) are capable of operating at pressures up to 100,000 psi (approximately 700 MPa), with control of pressurization and decompression which results in products of uniform density; reducing internal stresses, cracks, strains and laminations.

EPSI’s Cold Isostatic Presses (CIP) are available in a variety of sizes from pilot to large production units, and features top-closure and load-handling systems designed to meet the customer’s production requirements. Cold Isostatic Presses (CIP) are equipped with safety and alarm devices, adjustable pressure set-points, dwell time and fluid drain settings. Cold Isostatic Presses (CIP) are available either threaded or yoke-framed

COLD ISOSTATIC PRESSES

LAB-CIP, WET BAG

DRY BAG

HOT ISOSTATIC PRESSES

WARM ISOSTATIC PRESSES

HIGH PRESSURE SIMULATORS

QUARTZ CRYSTAL GROWING VESSELS

HIGH PRESSURE FOOD PROCESSORS

HIGH PRESSURE PUMPS

SPECIAL PRESSURE VESSELS APPLICATIONS

Cold Isostatic Presses (CIP) also feature a hydraulically intensified high-pressure pump, and a decompression circuit, with low wear. High product repeatability is obtained through the use of elastomer molds. The CIP offers an automated fast fill and drain circuit with a low-pressure transfer pump. Configurations available on the CIP include: a low-pressure decompression system, yoke frame or threaded closure system, and a vertical or gantry top-closure system.

		Medium Size & Pilot Production Cold Isostatic Presses (CIP) ADDITIONAL FEATURES Typical pressure vessel inside diameter up to 300 mm (12 inches) Compact free standing on the floor units or modular units when vessel needs to be standing in a pit Top closure handling devices with or without load handling system Customized units with numerous options for controls, automation, fluid filtering, decompression, etc

		Large Production Cold Isostatic Presses (CIP) ADDITIONAL FEATURES Vessel inside diameter references up to 1750 mm (68.9 inches) High displacement triplex plunger pumps up to 250 MPa (36,250 psi) Wire wound pressure vessel and yoke frame design for high pressures combined with large vessel diameters Large fluid handling systems for one or several CIP units. (emulsion oil dosing, large area filters, etc.) Ancillary equipment for mould handling and washing, transfer, etc. (integration in automated lines)

Cold Isostatic Presses (CIP) manufactured by EPSI Inc, a world leader in custom-engineered high-pressure solutions

Cold Isostatic Presses (CIP)

Cold Isostatic Presses (CIP), Wet Bag, and Molds

Medium Size & Pilot Production Cold Isostatic Presses (CIP)

Large Production Cold Isostatic Presses (CIP)